[Part name] Microwave communication equipment aluminum alloy 6061 parts machining
[Manufacturing process] Four-axis CNC milling
[Product features] multi-faceted processing
[Material used] Aluminum alloy 6061-T6
6061 aluminum alloy is a heat-strengthened alloy with good formability, weldability, machinability , medium strength. It can still maintain good operability after annealing.
6061-T651 is the main alloy of 6061 aluminum alloy. It is a high-quality aluminum alloy product produced by heat treatment pre-stretching process. Although its strength cannot be compared with 2XXX series 7XXX series, its magnesium silicon alloys have many characteristics have extremely Good processing performance, excellent welding characteristics electroplating, good corrosion resistance, high toughness, no deformation after processing, compact material without defects, easy polishing, easy color film, excellent oxidation effect other excellent characteristics. Therefore, it is widely used in decoration, packaging, construction, transportation, electronics, aviation, aerospace, weapons other industries.
【Surface treatment】Natural anodizing
The anodic oxidation of aluminum alloy is an electrolytic oxidation process. In this process, the surface of the aluminum alloy is usually transformed into an oxide film, which is protective decorative.
[Benefits after treatment]
1. Prevent corrosion of aluminum products
Since the film layer obtained by anodization has sufficient stability in the atmosphere, the oxide film on the surface of aluminum can be used as a protective layer. The oxide film obtained by anodizing aluminum in chromic acid solution is dense has good corrosion resistance. ；
2. Decorative aluminum products
The oxide film can absorb dyes of many colors, so aluminum products can be made into various colors. This layer of color is both a protective film a decorative film;
3. Enhance hardness wear resistance
Through hard anodizing of aluminum aluminum alloys, a thick hard film can be obtained on the surface. This film only has higher hardness thickness, but also has low roughness that can increase the resistance of aluminum products. Abrasiveness
4. As an electrical insulating layer
It has a certain effect on improving the electrical insulation of some products. Anodizing can be used to prepare the dielectric layer of the capacitor, aluminum oxide can be used to prepare an insulating layer on its surface.
5. As the bottom layer of spray paint
Due to the porosity good adsorption capacity of the anodic oxide film, it can be used as the bottom layer of spray paint other organic films, so that the paint film organic film can be firmly combined with the product, thereby increasing its corrosion resistance
6. As the bottom layer of electroplating
Before electroplating aluminum aluminum alloy products, a base layer must be applied to them before electroplating. There are many ways to apply the bottom layer on the substrate surface. In addition to electro-galvanizing, dipping zinc, electroless nickel plating, anodizing is also one of the important methods
[Processing equipment] Four-axis CNC machining center
Processing equipment types: three-axis CNC machining center, four-axis CNC machining center, five-axis CNC machining center, gantry milling machining center, drilling tapping machine, CNC lathe, precision grinder, molding press, autoclave, western machine, fast wire cutting Machine, middle wire cutting machine, slow wire cutting machine other processing equipment.
[Precision size] For finishing, the key position tolerance requirement is ±0.02mm; the size is 375mm*52mm*355mm
【Quantity Delivery Time】
Sample (1 piece minimum order): 2-7 days;
Small medium batch processing: 7-20 days;
Mass production: 20-35 days
FAQ:
1. Are you a factory or a trading company?
A: We are a factory which has been specialized in cnc machining & automatic manufacturing for more than 30 years.
2. Where is your factory and how can I visit it?
A: Our factory is located in Shenzhen city and you can get more detailed information by browsing our website: www.cnbenky.com
3. How long can I get some samples for checking and what about the price?
A: Normaly samples will be done within 1-2 days (automatic machining parts) or 3-5 day (cnc machining parts). The sample cost
depends on all information (size, material, finish, etc.). We will return the sample cost if your order quantity is good.
4. How is the warranty of the products quality control?
A: We hold the tightend quality controlling from very begining to the end and aim at 100% error free.
5.How to get an accurate quotation?
♦ Drawings, photos or samples of products.
♦ Detailed sizes of products.
♦ Material of products.
♦ Surface treatment of products.
♦ Ordinary purchasing quantity.
Our services cover all industries and reach all parts of the world.
